FCP

The White T-Shirt

LixxD — Wed, 13 Jun 2012 10:04:02 +0000

Upload Video

Converted Video

Converted Thumbnail

Sattelitevoices moderat

mrayeva1 — Wed, 16 May 2012 00:24:52 +0000

Upload Video

Converted Video

Converted Thumbnail

Collaborative film making workshop - 13th March 2012 CCW students

ewebb-ingall — Tue, 15 May 2012 21:07:06 +0000

Upload Video

Converted Video

Converted Thumbnail

Transferring FCP projects to after effects/avid/protools etc

processarts — Wed, 16 Nov 2011 16:21:03 +0000

Image

The Kit Room Video Cast - Mark In, Mark Out

Featured — Fri, 25 Feb 2011 19:11:57 +0000

London College of Communication tutorials and updates on film making software and equipment. Videos feature FCP editing, shooting tips and equipment run throughs.

Three Cameras Part One

http://www.youtube.com/user/TheKitRoom#p/u/4/0jsZBgP7xrk

The Mysteries of White Balance

http://www.youtube.com/user/TheKitRoom#p/u/5/7TrIvyn6t-8

A Matte Box and some Filters

http://www.youtube.com/user/TheKitRoom#p/u/6/TxqyzwnoOhg

A Mic for all Seasons

http://www.youtube.com/user/TheKitRoom#p/u/7/6IP7qnNAzF4

The Overwrite

http://www.youtube.com/user/TheKitRoom#p/u/8/q8NgtlfWC1s

The Insert

http://www.youtube.com/user/TheKitRoom#p/u/9/nDh9fNJe2_c

Paste and Remove Attributes in Final Cut Pro

http://www.youtube.com/user/TheKitRoom#p/u/10/KuAL13YV28s

J K L in Final Cut Pro

http://www.youtube.com/user/TheKitRoom#p/u/11/HKu5VTjVQjM

Tips and Tools in Final Cut Pro

http://www.youtube.com/user/TheKitRoom#p/u/12/OGKjNRrZYm0

Source and Destination in Final Cut Pro

http://www.youtube.com/user/TheKitRoom#p/u/13/X6yhFOdnCdM

Right Click in Final Cut Pro

http://www.youtube.com/user/TheKitRoom#p/u/14/L2xnHHq0WvU

Final Cut Pro - Getting Started

cfollows — Wed, 01 Dec 2010 08:14:08 +0000

If you're importing video plug in your fire wire cable into the camera and computer using the 4 pin (small into camera) and 6 pin (big into computer) USB fire wire cable. No need to plug in camera if not importing.

Open Final Cut Pro situated in the Applications folder.

When FCP begins to open there are different messages you may encounter, depending on your set up.

(External Device) is your camera; if you have no camera connected or its turned off or not connected correctly then you may get the message on the left.
If your not using a camera - press -- Continue
If your using a camera to import check your connections or turned on then - press -- Check Again.

(Missing Disks) you may get this warning if a previous user has moved there project folder or was using an external hard drive. EVERY USER MUST SET THEIR SCRATCH DISCS BEFORE STARTING EVERY TIME! Follow the instructions below:

NOTE: Scratch disks are your main folders where all you video content is saved and stored, you must check your scratch disk location every time you use FCP as other users will change them to their location for their project. If you don't change to your location your video renders and imports will be saved into another students folder.

Set your Scratch Disks: Go to the Final Cut Pro name to the left of the FCP file menu.
Choose System Settings

Click the top set tab and link it to your main project folder on your PC hard drive, click open and the path to you folder should display (Img 7 shows our scratch disk is connected to an external hard-drive to a folder called Process MEDIA e.g. = LaCie:Process MEDIA)

Ignore the next Set tab but follow the same procedure to make a scratch disk connection for the - Waveform Cache - Thumbnail Cache - Autosave Vault. Click OK.

Save your Final Cut Project, save it in your main project folder (the same folder as your scratch disks).

TIP:Review your footage on the camera before starting your project. Select sections to upload, take notes of the time code on the camera display e.g. 01:22 to 01:44 so you only import necessary footage so not to use up valuable hard drive space. (Video tip that helps the edit process - over record at the beginning and end of each shoot so you have spare footage to play with, try not to leave blank space (blue) between each recording as this will reset the tapes time code back to 00:00 for each clip).