This site has reached End of Life and will be taken down and removed on 01 Feb 2021.
It is strongly recommended that any material you would like to retain is downloaded before this date.

Home › video › The loss wax process Introduction - Bronze casting - Part one

The loss wax process Introduction - Bronze casting - Part one

Submitted by Featured on 24 May 2010 - 11:50am
in
tags
See video

PART 1 – The loss wax process Introduction - The loss wax process described by Chelsea college of art alumni Marco Chiandetti, supported by UAL foundry staff John Nicoll and Richard Elliott. Marco gives an in-depth overview his process prior to his final MA exhibition, following videos will show the process in-detail. Video by Chris Follows:

Full process - all Videos:

PART 2 – Runners and risers – http://process.arts.ac.uk/content/runners-and-risers-loss-wax-process-bronze-casting-part-two

PART 3 – 1st stage plaster – http://process.arts.ac.uk/content/1st-stage-plaster-loss-wax-process-bronze-casting-part-three

PART 4 – Fired plaster mould – http://process.arts.ac.uk/content/fired-plaster-mould-loss-wax-process-bronze-casting-part-four

PART 5 – Pit preparation – http://process.arts.ac.uk/content/pit-preparation-loss-wax-process-part-five

PART 6 – The pour – http://process.arts.ac.uk/content/pour-loss-wax-process-part-six

PART 7 – Removing bronze from plaster mould – http://process.arts.ac.uk/content/removing-bronze-plaster-mould-loss-wax-part-7

PART 8 – Marco Chiandetti talks about the finished piece – http://process.arts.ac.uk/content/marco-chiandetti-talks-about-finished-piece-loss-wax-process-part-8

No votes yet
6119 reads

Comments

Featured's picture
Submitted by Featured on 26 October 2010 - 8:52pm.

Bronze casting Introduction – The loss wax process described by Chelsea college of art alumni Marco Chiandetti, supported by UAL foundry staff John Nicoll and Richard Elliott. Marco gives an in-depth overview his process prior to his final MA

PART 1 – The loss wax process Introduction – http://process.arts.ac.uk/content/loss-wax-process-introduction-bronze-casting-part-one

PART 2 – Runners and risers – http://process.arts.ac.uk/content/runners-and-risers-loss-wax-process-bronze-casting-part-two

PART 3 – 1st stage plaster – http://process.arts.ac.uk/content/1st-stage-plaster-loss-wax-process-bronze-casting-part-three

PART 4 – Fired plaster mould – http://process.arts.ac.uk/content/fired-plaster-mould-loss-wax-process-bronze-casting-part-four

PART 5 – Pit preparation – http://process.arts.ac.uk/content/pit-preparation-loss-wax-process-part-five

PART 6 – The pour – http://process.arts.ac.uk/content/pour-loss-wax-process-part-six

PART 7 – Removing bronze from plaster mould – http://process.arts.ac.uk/content/removing-bronze-plaster-mould-loss-wax-part-7

PART 8 – Marco Chiandetti talks about the finished piece – http://process.arts.ac.uk/content/marco-chiandetti-talks-about-finished-piece-loss-wax-process-part-8

Creative Commons None (All Rights Reserved)
To the extent possible under law, all copyright and related or neighboring rights to this Work, The loss wax process Introduction - Bronze casting - Part one , by Featured are Reserved.